chemical representatives to be made use of:
10% heptyl (unsymmetrical dimethylhydrazine) water solution,
heptyl (unsymmetrical dimethylhydrazine) vapour with 0.8 to 1.0 kg/m3 concentration,
10% azotic (nitric) acid water remedy,
azotic (nitric) acid vapour with focus up to 1.1 kg/m3;
2. neutralization approach: thermal decay;
3. neutralization temperature level: +800? C to +1200? C;
? vapour ability: 70 to 200 m3/h,
? water option ability: 50 to 500 l/h;
5. inlet stress: as much as 2 bars;
6. automatic control system;
7. total measurements shall allow for placing the unit on a car framework.
clinical waste burners producers General Specs
6mm plate steel sheel construction
11cm 1400 o C Refractory L iner
Temperature regulated Heaters
Additional combustion Heaters
Interlock Turn On Load Doors
Separate Ash Door
One 2nd secondary Home @ 1000 o C.
400 ° C Silicone Based Paint Complete.
Alloy Temperature Sensing Unit.
Factory wired as well as examined.
Capacity-20 kg/ human resources.
Primary Chamber-1607 L.
Hearth Area-1:36 sq. m.
Second Chamber-694 L.
Primary Burner (oil) -420,000 btu.
Secondary Heater (oil) -900,000 btu.
secondary Combustion-1/ 6 hp.
Exhaust Stack-46cm x 6m.
Electrical Service-220/ 50.
Weight System-5.700 kg.
Measurement “D” -152 cm.
Tons Port Elevation- 60x 60 cm.
Ash Port Elevation -36 x 36 cm