an animal cremator for our organization in malaysia.currently we are doing specific personal cremation as well as mass cremation for animals in addition to clinical waste.a burner which can shedding between 3 to 5 tonnes daily of mixed waste items, plastics, rubber, combustible putrescible waste, clinical waste, rubber tyres, paper as well as cardboard, fabrics, eco-friendly timber waste etc. As a few of the waste products will contain non-flammable solids, the burner should be capable of removing those materials possibly using a rotating kiln procedure.
It is not intended to utilize any kind of gas, such as oil or diesel, to advertise the burning of the waste, as the waste products are needed to be incinerated making use of a free burning procedure. Warm air nevertheless from a downstream procedure will be offered to enhance the burner temperature level and burning rate as needed. Very heats in the incinerator are not needed and are not called for.
The burning of the waste products is expected to create hazardous discharges which will be cleaned up by means of other existing downstream procedures and also an Article Burning process in the burner is as a result not required.
The burner must be capable of suiting an automated waste feed process.Incinerator Requirements
S. No.
Summary
1
Feeding Ability
100 Kg.
2
Burning Capacity
50 Kg./ Hour
3
Feed Setting
Hands-on
4
Gas
Diesel Oil
5
Incinerator Kind
Double Burning Chamber with Integrated In Smoke Filter (Dry Scrubber)
6
Smokeshaft Product
Non Corrosive/ Rust Resistant Ideally Stainless for longer Life (Height 5-7 Meter)
7
Burners
Premium Quality European CE Qualified Oil Burner
8
Control board
Standard PLC Control Panel
9
Power Supply
220/380 Volt A/c 50 Hz.
10
Oil Tank Capability
200 ~ ~ 300 Litre
11
Burning Chamber
Fire Brick, Refractoy Block, Concrete