combustion chamber and one flue gas afterburning chamber. The incinerator must be able to meet the following parameters: 1.Treatment capacity of: a) 50 kg waste per hour. 2.Temperature: Main combustion chamber up to 850°C, and in the second chamber > = 1,100 °C 3.Retention Time: 2 seconds in the second chamber
Read MoreThe manufacturer must provide a declaration that the pressure vessel is manufactured in accordance with relevant guidelines for pressure equipment. Following accompanying documents should be supplied with the treatment system and shall be available at the Site: 1.Operation instructions (including process description). 2.Loading and maintenance procedures. 3.Short-form of operation and loading procedures. 4.P&I
Read MoreOperational Capabilities PROCESS MINIMUM 1 TON PER DAY OPERATED WITH LIMITED TRAINING REGULAR MAINTENANCE CAN BE COMPLETED WITH LIMITED TRAINING COMPLIES WITH EURO / OR US-EPA EMISSION STANDARDS ABILITY TO BURN WASTE LUBRICANTS (POL) HANDLE ORGANIC SOLIDS (TO INCLUDE RMW) DEPLOYABLE MOBILE 24 HRS OF CONTINUOUS USE AUTOMATIC LOADING SYSTEM AUTOMATED ASH REMOVAL SYSTEM
Read MoreIncinerators used will be limited to daylight hours of operation. This includes shutdown, cleaning and maintenance. Waste streams shall not be mixed during the incineration process and the ash collection chamber will be cleaned when a different waste stream is to be incinerated. The Company will provide the contractor with a list of items
Read MoreSECTION V TECHNICAL SPECIFICATIONS OF THE INCINERATOR General Description The plant must have four distinct sections that demonstrate three principles of turbulence, residence time and temperature retention. The regulated sections may include but not limited to: Overall plant layout Feed chamber/charging Primary combustion chamber Particulate scrubbers Acid gas The stack/chimney. Minimum
Read MoreIncinerators to be appropriate for the expert disposal of clinical & & & & medical waste/ rubbish with a better lots capability in the collection of about 1000-1500 Kg. The tough, self-contained burners will offer a exceptionally effective and effective, secure disposal in addition to be made according to appropriate globally directions, e.g. CE, EU,
Read MoreThe secondary combustion chamber must destroy the contaminant product and must resist to high temperature(1100 °C) Process Filtering system: Scruber to be mentionned as optional Emission Standards Compliance: BS 3316 or équivalent standard Version , the entire carcass of animals ( cattle , horses , Sheep, pigs , etc.) , as well as biologically
Read Moreair retention for at least 2 seconds at a temperature of less than 850C, the combustion In order to achieve the proper effect. ? must be a two-chamber incinerators, primary and secondary Fuel stoves ? The waste products to reduce the initial volume Possible to minimize (approximately 5% sterile ash Form). Purpose: Top Loader incinerator
Read MoreUp to 600kgs per ten-hour day of Type IV pathological waste or red bag waste rated at 2200 BTU’s per kg, based on batch loading twice daily. Incinerator, 20 kg/hr Burn Capacity (min. 1200 kgs. Waste Feed Capacity per day) (4-6 hours operations) (Power Supply 380V, 50Hz, 3Ph) Capacity: 30 kg/hr. Number item: 01 unit
Read MoreFlue Gas Cleaning System ? Wet Scrubber ? Electrostatic precipitation in combination ( Optional: Rate to be quoted separately) 7 Chimney Height 10m (minimum) ? Total duration of the supervision of installation, testing and commissioning works shall not exceed 2 weeks. 2.11 Commissioning
Read More
