Parameter Compliance Type of Waste To treat medical waste, categories A,B,C,D,E Type of Incinerator Pyrolytic Nominal Burn rate 50 t0 60 kg/ hr at 3500Kcal/Kg Loading Manual, Batch Load De Ashing Automatic or Manual batch de ashing The incinerator must avoid the release of black smoke and fine dust during the loading Primary chamber capacity 2-3 m³ The insulation   of the combustion chamber should be composed   of refractory bricks, having a higher content of aluminium and insulates, The plate of combustion in carborundum avoiding the fixing of glass and slags Hours of operation /Day >10 hrs Max Operating Temperatures 1400 °C Normal Operating Temperatures(Primary) >850 °C Operating Temperature(Secondary) >1100 °C It should have digital temperatures regulator( Temperatures regulator in digital watch) Carbon content of ashes <2% The installation should be completely free from visible smoke as well as offensive odours Residence time in second chamber 2 second minimum The internal diameter of the Chimney :Ø 400 Height of stack >8m Burner operation Automatic On/Off Fuel Diesel Fuel consumption at raed capacity >7kg waste /ltr Electricity consumption <2kW at rated capacity Operating Voltage 220 – 240V AC 50Hz Spare parts Supply for 1 year quoted as option Consumables Supply for 1 year of operation to be mentioned as option Warranty Parts and service support: 1 year minimum post comissioning Service support <72 hours Emission standard Compliance BS3316 or equivqlent standard Process filtering system Scruber to be mentioned as option CE Manufacturing Compliance BS EN 746-2-1997 Design Specification Type A,B,C,D,and E of medical waste Installation and Comissioning Included in condition of supply Training in preventive and curative maintenance and use of the incinerator Operator training inclusive in offer Capacity to treat Plastic Not less than 40% by weight