|
Items/Model |
TS200( PLC) |
|
Picture |
|
|
Principle |
Strong Waste Incineration Therapy |
|
Burn Rate |
Average 250 kg/hour |
|
Feed Capability |
Standard 350kg/feeding |
|
Control Setting |
PLC( Programmable Logic Controller Burner) |
|
Combustion Chamber |
1800L |
|
Internal Measurements |
150x110x110cm |
|
Second Chamber |
750L |
|
Smoke Filter Chamber |
Yes |
|
Feed Mode |
Handbook |
|
Voltage |
220V |
|
Power |
0.9 Kw |
|
Oil Intake (kg/hour) |
Ordinary 28 |
|
Gas Usage (m3/hour) |
Typical 33.6 |
|
Temperature Level Screen |
Digital Present |
|
Temperature Level Security |
Yes |
|
Oil Tank |
300L |
|
Feed Door |
80x60cm |
|
Smokeshaft |
10Meter |
|
Smokeshaft Kind |
Stainless-steel |
|
1st. Chamber Temperature |
800 ℃–– -1000 ℃ |
|
2nd. Chamber Temperature Level |
1000 ℃ -1200 ℃ |
|
Residency Time |
2.0 Sec. |
|
Gross Weight |
8500kg |
|
Exterior Dimensions |
300x160x190cm |
Heater procedure ought to be Automatic On/Off
Gas : diesel
The vendor must supply required information for the best of the installment
This incinerator with “PYROLYTIC” combustion have to have:
;
・ Refractory concrete:
§. Density: ≥ 100 mm
§. Nature: 42% of Al203
・ Shield in coarse panels:
§. Thickness: ≥ 75 mm
・ Nature: Calcium silicate.
* Burner of illumination of waste, with gas, common mono-bloc casting directing diving flame, lights and also safety of electronic ignition, irreversible air flow, electro-magnetic sluice entrance of regulation as well as isolating valve.
* Plate of burning in Carborundum, avoiding the dealing with of glass as well as slags.
A chamber of article burning of gases
* A heater of burning of gases,
* A device of shot of air enabling a complete recombustion of gases,
* A tool of air inlet of air conditioning of waste gases,
* A sheath of emptying of the gases charred.
* Carcass in solid sheet steel with support of link.
* Structure of the refractory;
・ Refractory concrete:
§ Thickness: ≥ 150 mm
§ Nature: 65% of Al203
・ Protect in coarse panel:
§ Thickness: ≥ 85 mm
Nature: Calcium