hiclover waste burner extra parts
Tel: +86-25-8461 0201
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
2020-03-06
2020-03-06
Hazardous and also unsafe wastes,
Clinical pharmaceutical as well as friendly liquids Wastes
Domestic trash
Electric and digital wastes
Hazardous waste
In General, all kind of wastes and also garbages
Ability 50-60Kg/ h
Combustion supporting materials
Coal oil, diesel oil
Temperature level inside
800-10000C
1000-12000C
Burning effectiveness
> 98%
Power intake
1.3 KW
Sound
< 78dB
Index of let smoke and waste gas
Ringelman’s smoke index < degree 1
Smoke focus
Oil
45.5
( mg/m3 ).
Gas.
25.5
( mg/m3 )
SO.
Oil.
0.176.
Gas.
0.065
NOX.
Oil.
0.031.
Gas.
0.038
H2S.
Oil.
0.016.
Gas.
0.008
CO
.
Oil. 8.32.
Gas.
35.64
small scale medical waste incinerator Demands.
Incombustible and also eruptive products not admitted
Process way.
2 burning closets (dampness drying, heat dirt elimination)
Combustion/ Heater.
Top quality made in Italy
Blower.
Good Quality made in China
Control Electrical.
Top quality made in China
Ability 50 Kg/h
Functioning Voltage.
220 V
Power.
1000 W
Applied For.
200 beds
Input Fashion.
Hands-on
Medical Burner, 24 kg/hr.
Medical Burner, 24 kg/hr including panel board, controls as well as accessories.
Heater entrance.
Chimney.
Blower.
Combustion heater
Medical Incinerator, 12 kg/hr.
Medical Burner, 12 kg/hr including panel board, controls and also accessories.
Furnace gateway.
Chimney.
Blower.
Burning burner
Medical Incinerator, 6 kg/hr.
Medical Burner, 6 kg/hr consisting of panel board, controls as well as devices.
Heater gate.
Chimney.
Blower.
Burning heater
the following containerized burners. (Kitchen area and lodging and grey water and black water plant eliminating waste) we need burner is each function different are done in one burner we need notified. Plant we installing for our holiday accommodation barge made use of in an offshore marine building and construction project. 200 Individuals would certainly be fit onboard.
WASTE BURNERS RECOMMENDATIONS
china medical incinerator Capability
? Blaze minimal 80kg/hr X 12 humans resources per day
? Disposal of both non-hazardous and contaminated materials streams (per waste inventory).
? Mobile System (Skid installed preference with lifting factors).
Design/Specifications.
? Incinerators must have an additional combustion chamber with a minimum temperature variety of 900c.
? Fluid waste streams shall be incinerated by a proper fluid injection system.
? The burners will certainly be mounted with visual alarms to signal procedures of low temperature in the secondary chamber.
Running Environment and also Ambient Problems
The Incinerators plan shall be developed to operate under the following conditions:.
? Ordinary Daily Max/Min June Temperature Level, 21-39 ° C.? Ordinary Daily Max/Min January Temperature Level, 2-12 ° C.
Medical waste burner,.
approx. 0.4 cubic metres,.
gasoline/ keys power operated,.
thermostatic temperature level control,.
programmable cycle
Our normal activities creates 2-5 tons of various waste products daily which vary from condemned carcasses, and also medical incinerator main combustion price
other wastes all which need to be blazed at above 800Centigrade gauged flue exhaust gas.To be used by small
healthcare facilities and facilities to safely take care of infectious as well as pathological wastes.
Tons Ability in the range of as much as 200 kg
– – Burning Rate approx. 50kg/Hour – –
Burners to be really reliable, gas efficient with high/ reduced ability melt rates
and to be made to meet the Norms of Air Pollution Control/ DEFRA, etc. Technology:
Temperature Controlled Heater. Heavy-duty housing, to be a quality, rugged, trustworthy, affordable Clinical Waste
Incinerator with relevant control, very easy to run and also self-supporting. Type of Gas: Diesel/ Oil or Petroleum.
Systems to be pre-assembled, pre-piped, pre-wired & & evaluated before Transport/ Export.
Within the structure of an environmental and medical equipment & & technology appointment and joint buying, this
Procurement Bureau welcomes applicants for pre-qualification in the purpose of mainly picking qualified firms to bid
for the above tender.
The supply will make up the unique devices for reliable waste administration as stated over for a new personal
atmosphere contract administration company with prepared operations 2013 in Indonesia as well as Thailand, as well as 2014 in West & & East
Malaysia to accomplish those expert services in order to abide by the federal governments safety and security disposal needs
for medical as well as hospital, professional waste in the region and also to fulfill the greater technical standard in this certain
field.small incinerators with filter (with the very least minimum pollution) for burning/combusting 5kg/hr, 10kg/hr, 15 kg/hr,
20kg/hr, 25kg/hr to 50kg/hr and also 300kg/hr of STRONG NATURAL DRY AND DAMP NON-HAZARDUOUS of any kind (including healthcare facility
wastes) daily or per hr. Should it be with no smoke, no fumes, no odour (odor), no dust, no emission of solid
particles and with the very least minimal contamination (within national as well as worldwide criteria). Need to be eco
healthy and balanced as well as acceptable with worldwide criteria. Need to not be with water scrubbers. Ash materials after burning
should be 3-4%.
Polaris Power saving Information: With the substantial use the health care industry and also the
advancement of clinical non reusable products, clinical waste generation is growing rapidly.
The latest data reveal that there were 261, in the city to the neighborhood strong waste
air pollution prevention details, just these 261 cities this year, medical waste quantity
reached 547,500 lots.
Another one stats reveal that at the end of 2012, the total variety of medical
establishments of 950 297 beds 5.7248 million, according to an average of 1 kg per bed
medical waste every day, the overall quantity of clinical waste produced in the country each
year to reach 200 million lots.
Faced with such a significant quantity of waste created, however several cities are made up of one or a.
small number of waste disposal in a solitary way of taking care of clinical waste incineration. When.
an instance of waste incineration plants closed down, the federal government and also the medical facility in the.
monitoring of clinical waste and also everyday procedures, will certainly deal with huge difficulties.
In fact, health center waste produced a large part of municipal strong waste and similar reduced-.
threat waste, regarding 75% to 90%, the continuing to be 10% to 25% are thought about damaging, it might posture.
a wellness risk, hospitals transmittable waste is generally not more than 10% of the total.
garbage. Minimize the amount of waste generated should work group monitoring as the.
property, today waste classification level of the healthcare facility, stressing.
Medical waste collection is essential to the execution of ecologically audio management.
of medical wastes, but many Chinese hospitals do not take notice of the kind handling.
clinical waste, as well as open area, no apparent signs, classification level is low.
General medical facility with typical household trash bins and also yellow clinical, healthcare facility and center.
staff informed Message logo, the swab and also various other body fluids enter call with the individual.
garbage into yellow garbage bag. The reporter visited some health centers located that blood.
Tests and also outpatient clinical area yellow trash bags of medical waste both areas.
Paper, food product packaging as well as other basic household waste.
A survey carried out in a hospital in Wuhu, Anhui Province reveals that at some clinical.
workers category idea is vague, non-infectious waste, such as clinical materials.
product packaging, unique medical waste combined with yellow bag. Such a method did not.
trigger harm to the spread of condition, but it enhances the cost of processing clinical waste.
Survey on the standing of management and disposal of medical waste in a primary healthcare facility.
revealed that the passing rate of garbage deposited only 45%. The survey also explained.
that a lot of clinical waste in the lack of sterilization, delivered to the transfer.
terminal handling, which might create secondary pollution trash take place during transportation.
Lots of neighborhood medical garbage disposal charge is determined according to bed, the amount of waste.
produced by hospitals not straight related to the processing charge paid. If the hospital.
improve the management level, lowering the amount of waste produced, as well as the very same number.
of beds, rubbish costs will certainly not be decreased, to ensure that is not conducive to motivating.
medical facilities resource waste separation as well as decrease.
Medical waste are complicated, including transmittable wastes, pathological wastes, chemical.
wastes and also damaging waste, and so on, connecting to different textile products, plastics, glass,.
steel as well as human organizations, a single treatment is difficult to accomplish for a selection of.
medical garbage safe therapy.
For various kinds of medical waste, we have a different processing method and device.
have actually been created as well as made use of all over the world. In order to reduce worldwide pollution of.
dioxins and furans, the Stockholm Convention on Persistent Organic Pollutants and the Globe.
Health Company advises making use of various other alternate kinds melted. Autoclaving is.
possibly the most extensively used non-burning disinfection, in addition to chemical handling.
innovation, refining modern technology as well as microwave plasma handling modern technology.
China is currently commonly utilized is incineration, this method has a tendency to produce huge amounts of.
damaging gas combination, consisting of hydrochloric acid, dioxins and furans, along with harmful.
metals lead, cadmium as well as mercury.
A more total clinical waste incineration system shall consist of the feed system,.
burner, burning air system, start the ignition and burn-assisted system, flue gas.
filtration system, and also the residue dealing with system, automatic monitoring system and.
emergency system, which flue gas cleaning system is utilized to cut dioxin, mercury as well as various other.
very hazardous substances by incineration. Nevertheless, research study reveals that some old devices.
medical burners, waste is a straight smoke exhaust emissions.
South China Institute of Environmental Sciences once a clinical waste incineration plant in.
Guangdong Province as the research study things, through the collection as well as analysis incineration.
plant and also the bordering dirt and also plant samples, PAHs comprehend incineration plant (PAHs).
distribution, resources and contamination levels. The outcomes show that clinical incinerators soil.
bordering a specific degree of contamination of PAHs identified in the dirt 16 polycyclic.
aromatic hydrocarbons, PAHs complete amount ranging 11.83 ng/ g ~ 788.24 ng/ g, mean 236.681 ng.
/ g; in the research study location downwind of the prevailing winds in the dirt, complete PAHs were.
considerably higher than the prevailing winds soil web content, and also the overall focus of.
PAHs in soil increases with range revealed a progressive decrease.
a certain type to utilize at a crematorium. Something that allows particularly for ash collection etc.cremation option to the deceased’s family members. Is this item ideal, are ashes easily collected and so on a cremator, for pet facility, can you introduce and also all detail of sales, tax obligation, environtment.-Plastic. 500Kg/hr and to be utilized optimal 6 times, is this implies it will give only 3 tons per day? Keeping in mind that job documents requires 10 tons/day
Plastic container-.
– Rags & & oiled.
Glass containers as well as aluminum-.
– Oils.
Fat-.
Filter, tires, belts.
– Chemicals, paint.
Household waste-.
Municipal incinerators with a 10-metric ton/24-hour capacity, full with Heaps, control board and also all accessories, complying with 01015 par. 5.16.1.
GREAT DEAL.
2.0
Medical incinerator with a 10 kg/hour (15 lbs/hour) ability shall be built on the site, total with Heaps, control board as well as all devices, abiding by 01015 the same level. 5.16.2.
MUNICIPAL STRONG WASTE BURNERS
Local waste incinerator amounts and capabilities will be made for 24-hour 7-day-a-week constant operation.
Incinerators shall be capable of processing both damp and also dry material and also operating on either diesel fuel, JP-8 gas,
or waste oil; see Plumbing for gas storage system needs. The complying with will be provided as a minimum:
Strengthened concrete placing foundations, feed or charging hoppers (or loaders), main combustion chambers
with ash cleanout doors, secondary combustion chambers with ash cleanout doors, cyclone air filters (or separators),
and also compelled air exhaust heaps (or chimneys).
The billing system will contain, as a minimum, a receptacle for top feeding as well as mechanically operated hydraulic
charging ram or augur. To stop warpage or extreme thermal expansion, a battery charger cooling system making use of either
air or water will be offered.
Primary combustion chamber will be either the rotary- or fixed fixed-hearth (or kiln) type incinerator. Burner
and also combustion air controls shall be fully automatic including, as a minimum, digital ignition as well as all
required interlocks and also safety tools to offer secure operation. The chamber as well as burner will be created to
keep a minimum burning temperature of at the very least 700 to 870 C (1300 to 1600 F), yet will not to go beyond 980
C (1800 F). The ash-removal system will include the automated continuous removal of the ash into an ashquench
pit where cooled down by water as well as gotten rid of by conveyor.
Additional combustion chamber shall be either the rotary- or stationary-hearth (or kiln) kind burner designed to
oxidize (or burn) the organic vapors as well as gases. Burner as well as combustion air controls shall be totally automatic
comprising of, as a minimum, electronic ignition and also all needed interlocks and safety and security gadgets to provide safe
operation. The chamber and burner will be designed to preserve a minimal combustion temperature of a minimum of
930 to 980 C (1700 to 1800 F), but will not to exceed 1150 C (2100 F). The ash-removal system shall consist of, as
a minimum, the straight guidebook removal into a completely dry
Cyclone air filters will be offered to eliminate the bigger particulates. Cyclone air separators may be provided with
powered followers to enhance the rate of the gases inside the cyclone to enhance the collection effectiveness for smaller sized
bits.
5.16.2 MEDICAL WASTE INCINERATORS
Medical waste burners will be especially designed by the supplier to dispose of all medical wastes. All devices shall be made for 8 hrs
per day of continuous procedure as well as be rated in quantity per hr (i.e. kg/hr or lbs/hr).
Burner packing or billing of medical waste will be batched-fed by hand.
Primary burning chamber shall be the stationary fixed-hearth (or kiln), multiple-chamber, retort type or bigger
ability rotary-hearth (or kiln) kind. Heater as well as burning air controls will be completely automated including, as a
minimum, digital ignition and all necessary interlocks as well as safety tools to give safe procedure. The
chamber as well as burner will be designed to maintain a minimal burning temperature of at the very least 760 to 870 C
(1400 to 1600 F). The ash-removal system shall include the automatic continual elimination of the ash right into an ashquench
pit where cooled down by water and removed by conveyor.
Second burning chamber will be a solid-walled and also -floored, horizontal, refractory-lined cyndrical tube kind
incinerator developed to oxidize (or shed) the organic vapors as well as gases. Heater and burning air controls will be
completely automatic comprising of, as a minimum, digital ignition as well as all needed interlocks and also safety and security tools to
offer risk-free operation. The chamber as well as burner will be created to preserve a minimum combustion temperature level
of a minimum of 930 to 1200 C (1700 to 2200 F) with a minimum gas house (or dwell) time of 2.0 secs. The ashremoval
system shall contain, as a minimum, the direct manual elimination right into a completely dry collection receptacle.
Cyclone air filters will be given to remove the bigger particulates. Cyclone air separators may be supplied with
powered followers to raise the speed of the gases inside the cyclone to enhance the collection efficiency for smaller
particles.
5.16.3 INCINERATOR HEAPS (OR CHIMNEYS)
Heap dimension will be in accordance with the manufacturer’s recommendations. Stacks shall be the forced-air kind and also
completely independent and also unattached to nearby structures. As a minimum, pile heights will lessen
downwash of stack discharges because of wind resistant impacts from close-by frameworks and be determined in accordance
with DoD 4715.05-G, Overseas Environmental Standard Assistance File. Heaps shall be provided with
corrosion-resistant steel climate caps.”
Items/Model | TS10(PLC) | TS20(PLC) | TS30(PLC) | TS50(PLC) | TS100(PLC) |
Burn Rate (Average) | 10 kg/hour | 20 kg/hour | 30 kg/hour | 50 kg/hour | 100 kg/hour |
Feed Capacity(Average) | 20kg | 40kg | 60kg | 100kg | 200 kg |
Control Mode | PLC | PLC | PLC | PLC | PLC |
Combustion Chamber | 100L | 210L | 330L | 560L | 1200L |
Internal Dimensions | 50x50x40cm | 65x65x50cm | 75x75x60cm | 100x80x70cm | 120x100x100cm |
Secondary Chamber | 50L | 110L | 180L | 280L | 600L |
Smoke Filter Chamber | Yes | Yes | Yes | Yes | Yes |
Feed Mode | Manual | Manual | Manual | Manual | Manual |
Voltage | 220V | 220V | 220V | 220V | 220V |
Power | 0.5Kw | 0.5Kw | 0.5Kw | 0.7Kw | 0.7Kw |
Oil Consumption (kg/hour) | 5.4–12.6 | 7.8–16.3 | 10.2–20 | 12.1–24 | 14–28 |
Gas Consumption (m3/hour) | 6.2–11.4 | 8–15.7 | 9.8–20 | 9.9–26.1 | 10–32.2 |
Temperature Monitor | Yes | Yes | Yes | Yes | Yes |
Temperature Protection | Yes | Yes | Yes | Yes | Yes |
Oil Tank | 100L | 100L | 100L | 100L | 200L |
Feed Door | 30x30cm | 45x40cm | 55x50cm | 70x55cm | 80x60cm |
Chimney | 3Meter | 3Meter | 5Meter | 5Meter | 10Meter |
Chimney Type | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
1st. Chamber Temperature | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ |
2nd. Chamber Temperature | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ |
Residency Time | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. |
Gross Weight | 1500kg | 2200kg | 3000kg | 4500kg | 6000kg |
External Dimensions | 140x90x120cm | 160x110x130cm | 175x120x140cm | 230x130x155cm | 260x150x180cm |
Items/Model | YD-30 | YD-50 | YD-100 | YD-150 |
Burning Rate (kgs/Hour) | 30 kgs/Hr. | 50 kgs/Hr. | 100 kgs/Hr. | 150 kgs/Hr. |
Feed Capacity (kgs) | 60 kgs | 150 kgs | 200 kgs | 300 kgs |
Equipment Weight | 2300 kgs | 4000 kgs | 5300 kgs | 7000 kgs |
Primary Chamber (Liters) | 360 | 900 | 1200 | 1500 |
Secondary Chamber (Liters) | 200 | 200 | 500 | 500 |
External Dimensions (cm) | 145x90x175 | 200x160x230 | 220x180x360 | 240x170x380 |
Internal Dimensions (cm) | 100x60x60 | 120x90x85 | 130x100x90 | 150x100x96 |
Oil Tank(Liters) | 200 | 300 | 300 | 300 |
Door Opening (cm) | 48 x 60 | 62 x 80 | 55 x 80 | 59 x 81 |
Chimney (M) | 5 | 5 | 10 | 10 |
Chimney Type | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
Secondary Chamber | YES | YES | YES | YES |
Mix-Combustion Chamber | YES | YES | YES | YES |
Smoke Filter Chamber | YES | YES | YES | YES |
Combustion Fuel | Oil/Gas | Oil/Gas | Oil/Gas | Oil/Gas |
Residency Time | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. |
Temperature Monitoring | YES | YES | YES | YES |
1st. Chmaber Temperature | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ |
2nd. Chmaber Temperature | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ |
Items/Model | YD-200 | YD-300 | YD-500 | YD-600 |
Burning Rate (kgs/Hour) | 200 kgs/Hr. | 300 kgs/Hr. | 500 kgs/Hr. | 600 kgs/Hr. |
Feed Capacity (kgs) | 400 kgs | 500 kgs | 800 kgs | 1100 kgs |
Equipment Weight | 7600 kgs | 8300 kgs | 13000 kgs | 16500 kgs |
Primary Chamber (Liters) | 2000 | 2400 | 4000 | 5500 |
Secondary Chamber (Liters) | 500 | 1200 | 1500 | 1500 |
External Dimensions (cm) | 270 x 185 x 380 | 260x220x420 | 320x220x460 | 360 x 220 x 475 |
Internal Dimensions (cm) | 180 x 115 x 96 | 220x110x100 | 257x147x108 | 300 x 147 x 125 |
Oil Tank(Liters) | 300 | 500 | 500 | 500 |
Door Opening (cm) | 59 x 81 | 90 x 110 | 108 x 128 | 108 x 128 |
Chimney (M) | 10 | 10 | 14 | 14 |
Chimney Type | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
Secondary Chamber | YES | YES | YES | YES |
Mix-Combustion Chamber | YES | YES | YES | YES |
Smoke Filter Chamber | YES | YES | YES | YES |
Combustion Fuel | Oil/Gas | Oil/Gas | Oil/Gas | Oil/Gas |
Residency Time | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. |
Temperature Monitoring | YES | YES | YES | YES |
1st. Chmaber Temperature | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ |
2nd. Chmaber Temperature | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ |
Items/Model | YD-10C | YD-20C | YD-30C | YD-50C |
Burning Rate (kgs/Hour) | 10 kgs/Hr. | 20 kgs/Hr. | 30 kgs/Hr. | 50 kgs/Hr. |
Feed Capacity (kgs) | 40 kgs | 40 kgs | 50 kgs | 80 kgs |
Equipment Weight | 2100 kgs | 2100 kgs | 2300 kgs | 2500 kgs |
Primary Chamber (Liters) | 200 | 200 | 250 | 400 |
Secondary Chamber (Liters) | 140 | 140 | 140 | 140 |
External Dimensions (cm) | 170x140x160 | 170x140x160 | 170x140x190 | 180x160x200 |
Internal Dimensions (cm) | 55x55x65 | 55x55x65 | 55x55x85 | 70x70x85 |
Oil Tank(Liters) | 50 | 100 | 100 | 150 |
Door Opening (cm) | 38 x 48 | 38 x 48 | 38 x 48 | 45×55 |
Chimney (M) | 5 | 5 | 5 | 5 |
Chimney Type | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
Secondary Chamber | YES | YES | YES | YES |
Mix-Combustion Chamber | YES | YES | YES | YES |
Smoke Filter Chamber | YES | YES | YES | YES |
Combustion Fuel | Oil/Gas | Oil/Gas | Oil/Gas | Oil/Gas |
Residency Time | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. |
Temperature Monitoring | YES | YES | YES | YES |
1st. Chamber Temperature | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ |
2nd. Chamber Temperature | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ |
2020-03-22
incinerator manufacturer,medical incinerator,small scale incinerator,oil fired incinerator
Items/Model
TS100
Shed Price
Ordinary 100 kg/hour
Feed Capacity
Average 200 kg/feed
Control Mode
PLC
Combustion Chamber
1200L
Internal Measurements
120x100x100cm
Secondary Chamber
600L
Smoke Filter Chamber
Yes
Feed Mode
Manual
Voltage
220V
Power
0.7 Kw
Oil Intake (kg/hour)
14– 28
Gas Intake (m3/hour)
10– 32.2
Temperature Level Monitor
Yes
Temperature Level Defense
Yes
Oil Container
200L
Feed Door
80x60cm
Smokeshaft
10Meter
Smokeshaft Kind
Stainless-steel
1st. Chamber Temperature
800 ℃– -1000 ℃
second. Chamber Temperature
1000 ℃ -1200 ℃
Residency Time
2.0 Sec.
Gross Weight
6000kg
External Measurements
260x150x180cm
2020-04-06
Waste Incineration HICLOVER Model TS75
Items/Model
TS75( PLC)
Picture
Principle
Waste Incineration
Burn Price
Average 75 kg/hour
Feed Ability
Typical 150kg
Control Setting
PLC( Programmable Reasoning Controller Incinerator)
Burning Chamber
770L
Inner Measurements
100x81x95cm
Second Chamber
385L
Smoke Filter Chamber
Yes
Feed Mode
Handbook
Voltage
220V
Power
0.7 Kw
Oil Consumption (kg/hour)
Typical 16.9
Gas Consumption (m3/hour)
***
Temperature Level Monitor
Digital Display
Temperature Level Security
Yes
Oil Storage Tank
100L
Feed Door
99x91cm
Smokeshaft
3Meter
Smokeshaft Type
Stainless-steel
1st. Chamber Temperature Level
800 ℃–– -1000 ℃
2nd. Chamber Temperature
1000 ℃ -1200 ℃
Residency Time
2.0 Sec.
Gross Weight
4500kg
External Measurements
2.30 mx1.30 mx2.55 m
With years worth of experience in this field, our clinical array of incinerators are made to provide for the cost-effective needs of little centers to the a lot more demanding and specialized demands of large healthcare facilities in their waste administration processes.incinerators in india, medical facility burners, incinco incinerators,500 litre burner, gas incineration, utilized burners
HICLOVER is currently supplying a full variety of medical waste burners, made to supply efficient waste destruction, utilizing ideal available modern technologies and also eco pleasant procedure. Due to the additional chamber with its 2 2nd retention duration, our medical burner variety is well matched to process clinical waste.
HICLOVER is now offering a full range of medical waste incinerators, designed to provide efficient waste destruction, utilizing best available technologies and environmentally friendly process. Due to the secondary chamber with its 2 second retention period, our medical incinerator range is well suited to process medical waste.