
Medical Waste Shredder Capacity: Should be 150 liters. Should be capable to shred up to 100 liters of the treated waste. 7 The technology should be
Medical Waste Shredder Capacity: Should be 150 liters. Should be capable to shred up to 100 liters of the treated waste. 7 The technology should be
Petrol: diesel Consumption: 8-10liter/hour Capacity: to cremate (carrion and spoils) 350-400kg/hour Temperature: 900-1350?C Operation temperature: -30~40?C Incinerator weight: 1800-2000 kg Volume: 0.70-0.80m/cube Exterior
The publications listed below form a part of this specification to the extent referenced. The publications are referenced in the text by basic designation only. A1) Technical Specification: Incinerators All
Piping and stack connection locations and sizes. Technical data including temperature rating and arrangement of refractory and insulation. Weights of unit and loading diagram of foundation. Evidence that
* Burner with fuel, mono-bloc casting guiding type with horizontal flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve. * A secondary
Key Features: — Full range incinerator with Economized Small Scale incinerator, Standard Small-Large Scale incinerator, General Municipal Solid Waste Incinerator, Pet and Animal Cremation, Containerized Mobile Incinerator, High Efficient Environmental
Waste Heater Design TS150 PLC, Review This design is small-scale waste incineration tools for tiny waste end result. Construction is dual/double combustion chamber with 02 sets oil burner, batch load
Waste Incinerator Design TS150 PLC, Testimonial Construction is dual/double combustion chamber with 02 sets oil burner, batch load incineration equipment. Waste feed chamber is 1570Liters (1.57m3, TS150 PLC). Primary &
The incinerator shall be equipped with a Diesel oil tank that will be supplied with DO from our DO tank located in the power station. The tank shall be equipped
Average 50-100 kg/hour Burn Rate Items/Model TS75( PLC) Principle Waste Incineration Therapy Burn Cost Average 50-100 kg/hour Feed Ability Ordinary 200-300 kg/feeding Control Mode PLC( Programmable Reasoning Controller Burner) Face