As Much As 600kgs per ten-hour day of Kind IV pathological waste or red bag waste ranked at 2200 BTU’s per kg, based upon batch packaging two times daily. Burner,
Category: hiclover
Incinerator double chamber with capacity 1.5 m3/batch or 6 m3/ day, digital thermocontrol array 0‐1200 C, thermocouple, air supply capacity 10m3/ min, power use 1.2 kWH/ hr, power 3 stage
Including:Incinerator: Structure to be specified The mark to be specified Water temperature: 800 to 1000 ° C; Refractory Temperature of more than 1100 ° C + obtained; Capacity: 20-50 kg
Heat Waste Incinerator Layout D. MEGABYTES 750XL Melt Rate-150Kg/ hr minimum Weight( Kg) -4000 kg Added Chamber (double chamber with post-burning) Gas Retention Time 2 2nd Gas Diesel Power Supply
c) All manuals must be in English language. 9) Each of the equipment supplied must be provided with user and technical manuals. Instructions on their usage, storage and service
Burning Capability: 125 kg minimum/time (3-6times/ day), twin chamber, double burning system Assigning door Mouth Size (mm): 760 * 760 (approx.). Smokeshaft External Size (mm): 300 ± 10. Combustion Improver
MINIMUM REQUIREMENTS FOR ENGINE OF INCINERATION CAPACITY OF INCINERATION 30KG / H 1. GENERAL SPECIFICATIONS: The incinerator for medical waste must be designated for the destruction of all types of
Burner Of Burning Capacity 30 kg/hr = 1 No The Incineration System contains: I. Main Heater with A. Refractory lined Key as well as Added Chamber. B. Refractory lined main
1- There are greater than 4000 Cubic Meter sludge are packed in Plastic Bags & & & & maintained more than ten years 2- Cleaning up and also taken care
i) Patient and operator safety and system performance should not be adversely affected by fluid spills. ii) If the unit is affected, it should fail safely. c) Overcurrent Protection