use in the health center for melting contaminated materials as well as chimicals, marginal Capacity 300 per hr. I will be marketing to my client?. Below is the information I was provided as well as definitely nothing else. The healthcare facility burner for usage in the professional waste as required by worldwide ecological administration. Minimum
Read MoreWaste Burner Mounted in ISO 20′ ′ ′ ′ or 40 ′ Container before leave Factory. Normal Waste Burning Price from 10kgs to 150kgs per human resources. Double Combustion Chamber The incinerator format with primary burning chamber, added burning chamber( post burning) as well as dry scrubber optional. This style will lower black smoke, dropped
Read Moremedical waste incinerator: medical waste and general waste Capacity to burn waste: 400 — 500 kg/hr Fuel: Diesel Fuel Consumption: 10 litres/hr maximum Incineration temperature: 950 – 1300 °c Casing: thick (min 5 mm) Stainless steel casing and fully insulated to withstand sea humidity Voltage: 220/240 V or 380/415V Frequency: 50 Hz Feeding: automatic Ash
Read MoreIncinerator System Solutions for Medical Waste Environmental, consisting of Waste Incineration, Smoke Discharge Treatment, High-temperature Sterilization, Waste Crusher, Needle Destroyer, Medical Waste Plan and Containerized Mobile Incinerators.
Read MoreComposition of the refractory lining: * Insulation: – Operating temperature: 1000 ° C max – Nature: Calcium Silicate – Thickness: 80 mm * Refractory: – Operating temperature: 1650 ° C max – Nature: Refractory bricks with 42 alumina – Thickness: 110mm Burner combustion: – The combustion chamber is equipped with a
Read MorePolaris Power saving Information: With the considerable usage the health care market and also the development of scientific non reusable products, scientific waste generation is proliferating. The latest information reveal that there were 261, in the city to the community solid waste air pollution avoidance details, simply these 261 cities this year, clinical waste quantity
Read MoreWe are looking at a simple incinerator which should be fired using domestic LPG bottles. Other sources of ignition can be considered as well but we need to keep it simple. Section VI. Requirements 2-86 required for preventive maintenance for five years and where necessary include stock of recommended spare-parts
Read Moremedical waste diesel incinerator Burning Rate:47.5–50kg/hour Minimum Operating Temperature:850o C(primary combustion) Maximum Operating Temperature:1450 oC(Afterburner chamber) Secondary Burning Capacity:Compulsory Density Insulation:20mm High Refractory Casting:Minimum 65mm Heavy duty refracting lining to withstand:1500 oC Average burn out time :maximum:3 hrs Fuel type:Diesel Fuel Consumption in L/hr:7.5 to 9 Residence time in secondary chamber:2sec Residue ash post 100kg:Max
Read Morel) Ease of Use and maintenance i) The unit should be simple to learn to use, operate, and maintain. ii) The unit should have abbreviated operating instructions included on or with the unit (e.g., on a laminated card attached to the unit). iii) The unit should be easy to clean, disinfect, and/or sterilize, as appropriate.
Read MoreAir exhaust needs develop restrictions on the quantity of contaminants that can be launched into the ambience. Table 1. Air Emission Demands for Solid Waste Incinerators Requirements Numeric Criterion Description Dioxins and Furans 80 pg I-TEQ/cubic metre Gadget of procedure is picograms of International Toxicity Matchings per cubic metre of air Mercury 20 µg/ Rcubic
Read More
