It must have the capacity to run not less than 10 hours/day This burner must be able to wreck all flammable wastes produced by medical centers, personal facilities, study laboratories, institutes, and also so on. 400 and its elevation: 8 m The Quantity of the burning chamber a minimum of: 1.200 L The Measurement of
Read MoreSMART ASH INCINERATORS FOR THE DISPOSAL OF HAZARDOUS WASTE ? Quantity: 20 systems ? The Burner collaborates with a 55 gallon open ended up steel drum ? The system operates without fuel as well as used just 120v or 220v electric power for the blowers ? Unit can melting oil contaminated waste and additionally medical
Read More(B) Features and Specifications of the Steam Boiler: Features of the Boiler: It must be an Electrical boiler Splash proof electric enclosure and switches Door Isolator to main electric enclosure Alarm lights and Safety/protection against excel pressure Level control on feedback water tank Technical Specification of the Boiler: Output: between: 90-110 kg/h (F&A 100
Read MoreSupply, arrangement and also screening of medical waste burner with an ability of 75 kg/ human resources gas (LPG) total amount with all devices and also as a result with the chimney based on the technical specs along with problems of public wellness make a room for the burner that fit 3 burners as in
Read MoreSignificant incinerators – – – – INDUSTRIAL INCINERATORS – – – specifications listed below. 2.) Measurement requirement for the heaters is 750 — — — — 850 kg ability 3.) The bum price require to be 80 LL 100 kg/ hour. 4) The key chamber shouId have an operating temperature level of 900 -1200 degree
Read MoreWaste calorific worth: 4000KCAL/KG Moisture Web content: 10-25%. Small Ability: 50Kg/Hour set load. Additional Chamber: 2 Secs @ 850degrees C The main burning chamber must make certain very little separation temperature degree is not much less than 850 degrees C. INSULATION. Calcium Silicate. Restricting Constant solution restriction 1000 degrees C. Density 25mm THROUGHPUT. 50kg/hour at
Read MoreTechnical Specifications of External SHREDDER Controls: Pre-programmed PLC controlled Password activated and reversal history indication Motor starter with overload protection Automatic instantaneous stop on hard object in shredder bed Automatic heavy cutting load reversal and re-try , up to three times Control housing Nema type 12 Cutting Hardwires: Chamber Dimensions(WxLxH): approx 33 c m
Read MorePrimary chamber – Consists of a monolithic high grade refractory concrete with high grade insulation backing, . Utilising a refractory hearth or equivalent for continuous ash removal. Secondary Chamber – Consists of high density, low thermal mass refractory ceramic fibre with an innovative low emissivity protective coating. bio medical waste treatment plant ( Incineration )with
Read MoreMajor components are – Ethanol, Paraffin, Silicon, Aluminium chloro hydrate, Bentone ,LPG quote for incinerators for industrial chemical wastes treatment, 1 burning rate must be Average 30kgs/h 2 inside of chamber material must be refractory concrete cement 3 it works in three system diesel oil/ Natural gas or LPG 4 voltage must be 220V 5
Read More
