.Necessary tooling and gauges shall have also to be supplied. 14.Supplier shall have to arrange free training for user staff in operation and maintenance 15.Supplier shall have to provide related drawings/diagrams (civil, mechanical and electrical etc.)electrical load and electrical circuitry 16.Warranty period shall be 24 months from date of proving test. We
Read MoreIntermittent Feed (w/optional loader): .9 yd3/hr (.7 m3/hr) up to 8 hrs/day Specifications: Length overall -9′-6″ (2896 mm) batch system w/o loader 18′-6″ (5639mm) w/optional loader system Width overall -7′-6″ (2820mm) Height (w/o stack) -10′-0″ (3048mm) Approx. Weight – 14,000 lbs. (6364 kg)
Read MoreHeater 20 Kg Burner electrically ran containing: A cage for receipt of biomedical waste; A burning chamber with fireplace with a filter to preserve ashes; A cover; An air supply; A wind generator allowing supply air. Burning temperature: 1800 ° C. Consists of all gadgets. ▪ The burner ought to be a modern-day garbage disposal
Read MoreThe Authority may require that the certificate holder have tests carried out by an accredited institution to determine stack and/or ground level concentrations of the following substances. Cadmium and compounds as Cd Mercury Hg Thallium Tl Chromium Cr Beryllium Be Arsenic As Antimony Sb Barium Ba Lead Pb Silver Ag Cobalt Co Copper
Read More?Incinerate minimum 80kg/hr X 12 hrs per day ?Disposal of both non-hazardous and hazardous waste streams (per waste inventory) ?Mobile Unit (Skid mounted preference with lifting points) Design/Specifications ?Incinerators must have a secondary combustion chamber with a minimum temperature range of 900c ?Liquid waste streams shall be incinerated by an appropriate liquid injection system ?The
Read MoreClass 2 Industrial Incinerators Class 2A: Commercial Incinerators for the disposal of waste that contains hazardous, potential hazardous and bio-medical waste where the operator exceeds 100 Kg/day. Dimensions: 2.2m(l) x 1.5m(w) x 2.5m(h) Fully automatic computer multi control system. Fuel Options- Diesel and natural gas, electricity Wasted fuel- >12L/h The incinerator should burn up
Read MoreEnsure flame contact with all gases is achieved. –yes Ensure residence time is not less than two (2) seconds. –yes Ensure the gas temperature as measured against the inside wall in the secondary chamber & not in the flame zone, is not less than 1100oC.—1000-1200 oC Ensure the oxygen content of the emitted gases
Read MoreCombustion Efficiency 99.99% Retention time Of the flow gases not less than 2 Sec in the hot portion. Excess Oxygen concentration Of primary combustion chamber 3-6% max. Refractory The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. resistance. Not less than 1400 C for the first
Read MoreWe are looking for small incinerators with filter (with least minimum pollution) for burning/combusting 5kg/hr, 10kg/hr, 15 kg/hr, 20kg/hr, 25kg/hr to 50kg/hr and 300kg/hr of SOLID ORGANIC DRY AND WET NON-HAZARDUOUS of any kind (including hospital wastes) per day or per hour. Should it be with no smoke, no fumes, no odour (smell), no dust,
Read MoreHICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project. We supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, clinic, hospital, medical center, hygiene clinical waste destruction with medical disposable, biological waste,
Read More
