chemical agents to be utilized: 10% heptyl (unsymmetrical dimethylhydrazine) water solution, heptyl (unsymmetrical dimethylhydrazine) vapour with 0.8 to 1.0 kg/m3 concentration, 10% azotic (nitric) acid water solution, azotic (nitric) acid vapour with concentration up to 1.1 kg/m3; 2. neutralization method: thermal decomposition; 3. neutralization temperature: +800?C to +1200?C; 4. performance: ? vapour capacity: 70 to
Read Moresecondary chamber 1000 degree chimney standard shredder separately Autoclave or microwaves separately temperature monitor attached outside of machine operating Fuel and electric During the start and end incineration operations at the waste incineration plant the temperature shall be maintained at 850 °C, while it shall be 1100 °C when incinerating
Read MoreWaste Incinerator Capacity The waste incinerator units shall be designed to burn medical waste load of capacity 50 kg/hr with calorific values ranging from 2,300 kJ/kg to 30,000 kJ/kg at a designed thermal rate of 1,440,000 kJ/hr. Method of Waste Charging Waste shall be fed into the primary chamber manually, that is by hand.
Read Moremedical waste incinerator: medical waste and general waste Capacity to burn waste: 400 — 500 kg/hr Fuel: Diesel Fuel Consumption: 10 litres/hr maximum Incineration temperature: 950 – 1300 °c Casing: thick (min 5 mm) Stainless steel casing and fully insulated to withstand sea humidity Voltage: 220/240 V or 380/415V Frequency: 50 Hz Feeding: automatic Ash
Read MoreAir exhaust needs develop restrictions on the quantity of contaminants that can be launched into the ambience. Table 1. Air Emission Demands for Solid Waste Incinerators Requirements Numeric Criterion Description Dioxins and Furans 80 pg I-TEQ/cubic metre Gadget of procedure is picograms of International Toxicity Matchings per cubic metre of air Mercury 20 µg/ Rcubic
Read MoreHICLOVER, Nanjing Clover Medical Development Co., Ltd, supply system options for medical ecological management, animal as well as also household pet dog cremation design, various other municipal solid waste incineration job. We offer single combustion chamber, double burning chambers, 3 burning chambers as well as likewise multi-combustion chambers waste incinerators for research laboratory, center, university
Read MoreIncinerate: medical waste and general waste Capacity to burn waste: 400-500kg/hr Fuel: Diesel Fuel Consumption: 10 liters/hr maximum Incineration temperature: 950-1300 degrees centigrade Casing: thick (min 5mm) stainless steel casing and fully insulated to withstand sea humidity Voltage 220/240v or 380/415V Frequency 50Hz high-capacity, powerful, European Standard incinerator,ideal for high volume incineration,with integral after-burner for
Read MoreIncinerator double chamber with capacity 1.5 m3/batch or 6 m3/ day, digital thermocontrol array 0‐1200 C, thermocouple, air supply capacity 10m3/ min, power use 1.2 kWH/ hr, power 3 stage with netral, cooling water sprinkler ability 5L/ minute, finished with refractory (insulation, castable, ceramic covering) and also PLC SUPPLY, INSTALLMENT In Addition To COMMISSIONING OF
Read MoreIncluding:Incinerator: Structure to be specified The mark to be specified Water temperature: 800 to 1000 ° C; Refractory Temperature of more than 1100 ° C + obtained; Capacity: 20-50 kg / hour Fireplace: 4 to 6 meters high; Dimension 70 cmx70 crn Height: 1.10 meters Fuel: coal; Aspiration: natural – A receiving cage for biomedical
Read MoreHeat Waste Incinerator Layout D. MEGABYTES 750XL Melt Rate-150Kg/ hr minimum Weight( Kg) -4000 kg Added Chamber (double chamber with post-burning) Gas Retention Time 2 2nd Gas Diesel Power Supply for control box 220V-240, solitary phase 50-60Hz Minimum operating temperature degree 1200 oC One year extra parts bundle for full maintainability 10m pipe pipe. 1100
Read More
