The sludge shall be properly atomized by means of compressed air in the burner so as to ensure complete combustion of the sludge. An air compressor complete with a receiver shall be included in the incinerator. Both compressor and receiver shall be mounted on the same skid as the incinerator. The
Read MorePrimary Burning Chamber Waste Charging Door: Given with refractory cellular lining with securing gaskets Ash Eliminated Door: Supplied with refractory cellular lining with sealing gaskets Exterior Body MOC: Mild Steel, 5mm Main Chamber: Stainless-steel Running Temperature degree:800. ± 50 ◦ C. Insulation: Insulation Block. Burner Kind: Kanthal Al High Quality. Power Use: 75 KW (Initial
Read More1. Is your house time greater than 2 secs? 2. Is the primary as well as additional air preheated? 3. Could it be given as a constant system? 4. Exists a monitoring system for functional criterion? (temperature). 5. Exists an info logging system? 6. Does it offer control treatments to change waste feed, grate rate,
Read MoreCapacity Not less than 500Kg/hr. Operation 24hr-7days/week continuous operation. Combustion chamber 2 combustion chamber. Temp. First combustion chamber 800-1000 C. Secandry combustion chamber 1000-1200 C, with the possibility to be upgraded to 1400 C. Combustion Efficiency 99.99% Retention time Of the flow gases not less than 2 Sec in the hot portion. Excess Oxygen concentration
Read MoreBurning rate: 250 Kg/hr. It should be able to Operate not Less than 10 hours/day This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc… Design Specification: Types A, B, C, D, and E of medical waste “PYROLYTIC” combustion, by controlling the gasification of waste. The incinerator
Read MoreSolid waste to be incinerated Cartons, rags, cotton and other wastes associated with generation of electricity loaded in the incinerator in bags. Loading capacity: At least 100 Kg / h Start up fuel Diesel Oil 2.3 Incinerator Supply The incinerator shall be equipped with
Read MoreTECHNICAL INCINERATORS SPECS FOR 2 medical facilities INTRO All the incinerators to be supplied and installed must meet the Government of Kenya waste Management Regulation 2006 in particular 3rdschedule regulation (26, 47) pertaining classification, standards, criteria, and procedure for installing/operating incinerators as authored by the National Environmental Management and Coordination (waste management) regulation 2006, legal
Read More1) Policy – – – – Incinerator: It is developed to sanitize medical waste, lower its amount, and make its parts unrecognizable all in one completely confined as well as automated system. 2) Waste Disposal Plan a)Classification The contaminated waste is filled up right into the leading stainless-steel chamber where a tough shredder reduces the waste into
Read More“PYROLYTIC” burning, by managing the gasification of waste The incinerator producer need to remain clear of the launch of black smoke along with excellent dirt, during the loadings. It will certainly be able to lower the quantity of wastes by 98%. It shall have the capability to hold discharge in the second shed with gas
Read MoreThe incinerator shall also be equipped with special loading devices and mechanisms that allow safe incineration of solid waste simultaneously with liquid sludge. Loading of solid waste may be achieved through bags. All intermediate piping, bellows and other fittings for connection between the tanks , burner, compressor and other equipment supplied on the skid
Read More
