incinerator providers.7) Burn cost: 15 – – – – 20 Kg/h 8) Ability: very little less than 130 L. 9) Concentrations of numerous contaminants in heap gases listed below discovery limitations. 10) Gasoline. 11) Electronic system control. 12) Easy to run and also really little training. 13) Any kind of type of tool or devoted
Read More.Necessary tooling and gauges shall have also to be supplied. 14.Supplier shall have to arrange free training for user staff in operation and maintenance 15.Supplier shall have to provide related drawings/diagrams (civil, mechanical and electrical etc.)electrical load and electrical circuitry 16.Warranty period shall be 24 months from date of proving test. We
Read MoreIntermittent Feed (w/optional loader): .9 yd3/hr (.7 m3/hr) up to 8 hrs/day Specifications: Length overall -9′-6″ (2896 mm) batch system w/o loader 18′-6″ (5639mm) w/optional loader system Width overall -7′-6″ (2820mm) Height (w/o stack) -10′-0″ (3048mm) Approx. Weight – 14,000 lbs. (6364 kg)
Read More?Incinerate minimum 80kg/hr X 12 hrs per day ?Disposal of both non-hazardous and hazardous waste streams (per waste inventory) ?Mobile Unit (Skid mounted preference with lifting points) Design/Specifications ?Incinerators must have a secondary combustion chamber with a minimum temperature range of 900c ?Liquid waste streams shall be incinerated by an appropriate liquid injection system ?The
Read MoreCombustion Efficiency 99.99% Retention time Of the flow gases not less than 2 Sec in the hot portion. Excess Oxygen concentration Of primary combustion chamber 3-6% max. Refractory The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. resistance. Not less than 1400 C for the first
Read MoreIncinerate: medical waste and general waste Capacity to burn waste: 400 — 500 kg/hr Fuel: Diesel Fuel Consumption: 10 litres/hr maximum Incineration temperature: 950 – 1300 °c Casing: thick (min 5 mm) Stainless steel casing and fully insulated to withstand sea humidity Voltage: 220/240 V or 380/415V Frequency: 50 Hz Feeding: automatic Ash 1 leftovers
Read MoreIncinerators used will be limited to daylight hours of operation. This includes shutdown, cleaning and maintenance. Waste streams shall not be mixed during the incineration process and the ash collection chamber will be cleaned when a different waste stream is to be incinerated. The Company will provide the contractor with a list of items
Read MoreIncinerate: medical waste and general waste Capacity to burn waste: 400-500kg/hr Fuel: Diesel Fuel Consumption: 10 liters/hr maximum Incineration temperature: 950-1300 degrees centigrade Casing: thick (min 5mm) stainless steel casing and fully insulated to withstand sea humidity Voltage 220/240v or 380/415V Frequency 50Hz Feeding: Automatic Ash/leftovers removal: Automatic Flue gas filtration system: Yes Thus,
Read MoreFully automatic sequential control provided by internal PLC system providing control of: Secondary chamber pre-heat Burn cycle (variable) Cool down cycle Fuel Options Diesel, LPG, Natural or Bio Gas. Typical Fuel Consumption Diesel: 8 / 10 litres per hour Liquid Propane Gas: 6 / 8 litres per hour Natural Gas: 7 / 9 Nm3 per
Read MoreSMART ASH INCINERATORS FOR THE DISPOSAL OF HAZARDOUS WASTE ? Quantity: 20 systems ? The Burner collaborates with a 55 gallon open ended up steel drum ? The system operates without fuel as well as used just 120v or 220v electric power for the blowers ? Unit can melting oil contaminated waste and additionally medical
Read More
