www.njctw.com
Heater 20 Kg Burner electrically ran containing: A cage for receipt of biomedical waste; A burning chamber with fireplace with a filter to preserve ashes; A cover; An air supply; A wind generator allowing supply air. Burning temperature: 1800 ° C. Consists of all gadgets. ▪ The burner ought to be a modern-day garbage disposal system, made to bum medical
Read More
The Authority may require that the certificate holder have tests carried out by an accredited institution to determine stack and/or ground level concentrations of the following substances. Cadmium and compounds as Cd Mercury Hg Thallium Tl Chromium Cr Beryllium Be Arsenic As Antimony Sb Barium Ba Lead Pb Silver Ag Cobalt Co Copper Cu Manganese Mn Tin Sn
Read More
?Incinerate minimum 80kg/hr X 12 hrs per day ?Disposal of both non-hazardous and hazardous waste streams (per waste inventory) ?Mobile Unit (Skid mounted preference with lifting points) Design/Specifications ?Incinerators must have a secondary combustion chamber with a minimum temperature range of 900c ?Liquid waste streams shall be incinerated by an appropriate liquid injection system ?The incinerators will be installed with
Read More
Class 2 Industrial Incinerators Class 2A: Commercial Incinerators for the disposal of waste that contains hazardous, potential hazardous and bio-medical waste where the operator exceeds 100 Kg/day. Dimensions: 2.2m(l) x 1.5m(w) x 2.5m(h) Fully automatic computer multi control system. Fuel Options- Diesel and natural gas, electricity Wasted fuel- >12L/h The incinerator should burn up to 200kg < of waste
Read More
Ensure flame contact with all gases is achieved. –yes Ensure residence time is not less than two (2) seconds. –yes Ensure the gas temperature as measured against the inside wall in the secondary chamber & not in the flame zone, is not less than 1100oC.—1000-1200 oC Ensure the oxygen content of the emitted gases is not less than 11%.–yes
Read More
Combustion Efficiency 99.99% Retention time Of the flow gases not less than 2 Sec in the hot portion. Excess Oxygen concentration Of primary combustion chamber 3-6% max. Refractory The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. resistance. Not less than 1400 C for the first combustion chamber, and not less
Read More
We are looking for small incinerators with filter (with least minimum pollution) for burning/combusting 5kg/hr, 10kg/hr, 15 kg/hr, 20kg/hr, 25kg/hr to 50kg/hr and 300kg/hr of SOLID ORGANIC DRY AND WET NON-HAZARDUOUS of any kind (including hospital wastes) per day or per hour. Should it be with no smoke, no fumes, no odour (smell), no dust, no emission of solid particles
Read More
HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project. We supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, clinic, hospital, medical center, hygiene clinical waste destruction with medical disposable, biological waste, medical plastic waste, hazardous waste,
Read More
1.Solidifier (Fluid waste disposal product) Liquid Waste Solidifier for Water Based Special Features of Solidifier 2lb bottle Effectively solidifies potentially serious infectious waste quickly Quickly8 penetrates to solidify blood and body fluid to convert Gels in seconds No shaking required Retrains solidity to prevent spills and leaks for safe and easy bagging and easy transport to disposal. Concentrated formula:
Read More
Physical /Chemical Characteristics: Boiling Point (_F) : N/A Appearance & Odor: Off white, odorless Vapor Pressure(mm Hg): N/A Volatiles (% by weight): N/A Vapor Density (Air =1) :N/A Evaporation Rate )n-butylacetate=1): N/A HMIS Classification : Health:1; Flammability: 1 Reactivity Data: Stability: Stable Conditions to Avoid: None Know Incompatibility (materials to avoid: Strong oxidizers Hazardous Decomposition: Thermal Decomposition: CO,
Read More