www.njctw.com
The following requirements are to be considered as an integral part of the technical specifications for each equipment type. The system offered shall be designed to operate normally under the conditions of different regions in Kenya. These conditions may include but not limited to power supply, temperature, humidity, and other climatic conditions. A warranty for a
Read More
It is expected that the Bidder will cooperate closely with PATH and target Hospitals for the new waste handling building/area and will make available all needed technical information, drawings, etc., The following waste streams shall be treated in the new HCW treatment center(s): Infectious waste Sharps waste Pathological waste Pharmaceutical waste including cytotoxic or genotoxic
Read More
SECTION V TECHNICAL SPECIFICATIONS OF THE INCINERATOR General Description The plant must have four distinct sections that demonstrate three principles of turbulence, residence time and temperature retention. The regulated sections may include but not limited to: Overall plant layout Feed chamber/charging Primary combustion chamber Particulate scrubbers Acid gas The stack/chimney. Minimum capacity of primary chamber =
Read More
Finally, steam to the jacket should shut off, the unloading door is to be opened Then the shaft and mixing arms are reversed to act as unloading mechanism and should scoop the waste fragments out of the unloading door, onto a conveyor belt or directly into a waste container. The vessel should now be ready for another treatment cycle, having
Read More
Sterilization time: approx. 30 minutes at 121◦C/1.1 Bar or approx 15 minutes at 132◦C/2.5 Bar to achieve 6log10 sterility Fragmentation inside the chamber: Heavy duty with maximum size of final product <20 cm. Volume reduction of the waste after processing : by 60-80% through complete waste dehydration including liquid content of the waste All actions after loading for sterilization, fragmentation
Read More
Incinerators to be appropriate for the expert disposal of clinical & & & & medical waste/ rubbish with a better lots capability in the collection of about 1000-1500 Kg. The tough, self-contained burners will offer a exceptionally effective and effective, secure disposal in addition to be made according to appropriate globally directions, e.g. CE, EU, etc . Sort of Gas:
Read More
Lifting Chains: Must be dual lifting chain of roller style & must meet safety factor at least 6:1. Hydraulic System: Durable cylinder with a chrome plated ram and a relief valve for overload protection Forks: Heavy duty steel approx. 4.0” wide x 42” long fixed forks Platform: solid steel Battery: A heavy duty 12 volt, 125 amps/hour industrial strength battery.
Read More
The secondary combustion chamber must destroy the contaminant product and must resist to high temperature(1100 °C) Process Filtering system: Scruber to be mentionned as optional Emission Standards Compliance: BS 3316 or équivalent standard Version , the entire carcass of animals ( cattle , horses , Sheep, pigs , etc.) , as well as biologically hazardous waste Products in the
Read More
“Waste chamber Chamber capacity 300 kg Chamber volume .54m3 Chamber size (outside) Width: 91cm, Height: 86cm Length: 152cm Door opening 66 x 76 cm Height to door 84 cm Height to top of stack 5.4 m Suggested slab size (L x W x Thickness) 1.8 m x 2.4 m x 10 cm Burn rate: Approximately 45 kg/hr. Stack: 2′-14″” dia.
Read More
air retention for at least 2 seconds at a temperature of less than 850C, the combustion In order to achieve the proper effect. ? must be a two-chamber incinerators, primary and secondary Fuel stoves ? The waste products to reduce the initial volume Possible to minimize (approximately 5% sterile ash Form). Purpose: Top Loader incinerator of general, medical and dry
Read More