medical

Burner to reduce black bag garbage dump waste

30 August 2013 Last upgraded at 21:18 BST Five councils in south eastern Wales have developed a partnership to take care of black bag waste in a proposal to minimize rubbish going to garbage dump. Write-up valued quote from the network Environment contributor Iolo ap Dafydd reports. Article priced quote from the network

Read More
medical

infectious waste pyrolysis manufacturer chinalarge family pet incinerators

Major components are– – Ethanol, Paraffin, Silicon, Aluminium chloro hydrate, Bentone, LPG quote for burners for industrial chemical wastes therapy, 1 burning price need to be Average 30kgs/h 2 within chamber item need to be refractory concrete cement 3 it operates in three system diesel oil/ Gas or LPG 4 voltage must be 220V 5 inside temperature degree initially need

Read More
medical

incinerator manufacturer china

The sludge shall be properly atomized by means of compressed air in the burner so as to ensure complete combustion of the sludge.     An air compressor complete with a receiver shall be included in the incinerator. Both compressor and receiver shall be mounted on the same skid as the incinerator.     The incinerator shall also provide digital

Read More
medical

china heater distributor and also exporter

Primary Burning Chamber Waste Charging Door: Given with refractory cellular lining with securing gaskets Ash Eliminated Door: Supplied with refractory cellular lining with sealing gaskets Exterior Body MOC: Mild Steel, 5mm Main Chamber: Stainless-steel Running Temperature degree:800. ± 50 ◦ C. Insulation: Insulation Block. Burner Kind: Kanthal Al High Quality. Power Use: 75 KW (Initial Lots ). Electric Supply:3 Phase

Read More
medical

burner maker in china

1. Is your house time greater than 2 secs? 2. Is the primary as well as additional air preheated? 3. Could it be given as a constant system? 4. Exists a monitoring system for functional criterion? (temperature). 5. Exists an info logging system? 6. Does it offer control treatments to change waste feed, grate rate, as well as quantity, distribution

Read More
medical

waste incinerator manufacturers china

Capacity    Not less than 500Kg/hr. Operation    24hr-7days/week continuous operation. Combustion chamber    2 combustion chamber. Temp.    First combustion chamber 800-1000 C. Secandry combustion chamber 1000-1200 C, with the possibility to be upgraded to 1400 C. Combustion Efficiency    99.99% Retention time    Of the flow gases not less than 2 Sec in the hot portion. Excess Oxygen concentration    Of primary combustion chamber 3-6%

Read More
medical

waste burner provider in china

Burning rate: 250 Kg/hr. It should be able to Operate not Less than 10 hours/day This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc… Design Specification: Types A, B, C, D, and E of medical waste “PYROLYTIC” combustion, by controlling the gasification of waste. The incinerator must avoid the release of

Read More
medical

laboratory incinerator china manufacturer

Solid waste to be incinerated     Cartons,  rags,  cotton  and  other  wastes  associated  with  generation  of  electricity loaded in the incinerator in bags. Loading capacity: At least 100 Kg / h     Start up fuel     Diesel Oil       2.3  Incinerator Supply     The incinerator shall be equipped with sludge pumps that allow homogenous

Read More
medical

TECHNICAL INCINERATORS REQUIREMENTS FOR 2 health centers in Kenya

TECHNICAL INCINERATORS SPECS FOR 2 medical facilities INTRO All the incinerators to be supplied and installed must meet the Government of Kenya waste Management Regulation 2006 in particular 3rdschedule regulation (26, 47) pertaining classification, standards, criteria, and procedure for installing/operating incinerators as authored by the National Environmental Management and Coordination (waste management) regulation 2006, legal notice No. 121 of 29th September

Read More