www.njctw.com
Finish All equipment shall be painted with a coat of zinc rich primer and two coats of high temperature heat resistant polyurethane type paint. All painted surfaces shall be prepared by either steel shot cleaning or sand blasting. Identification and Name Plates Identification and name plates containing the manufacturer’s name, model number, serial number, and other pertinent information shall
Read More
medical waste diesel heater Burning Cost:47.5–– – – 50kg/hour. Minimum Operating Temperature level:850 o C( key combustion). Optimum Operating Temperature level:1450 oC( Afterburner chamber). Second Burning Capacity: Compulsory. Thickness Insulation:20 mm High. Refractory Casting: Minimum 65mm. Strong refracting lining to hold up against:1500 oC. Regular burn out time: optimum:3 humans resources. Fuel type: Diesel. Gas Consumption in L/hr:7.5 to 9.
Read More
Incinerate: medical waste as well as additionally basic waste Capability to melt waste: 400-500kg/ human resources. Gas: Diesel. Gas Consumption: 10 liters/hr optimum. Incineration temperature: 950-1300 levels centigrade. Case: thick (mins 5mm) stainless-steel covering as well as absolutely safeguarded to. stand up versus sea humidity Voltage 220/240v or 380/415V Uniformity 50Hz. high-capacity, powerful, European Requirement heater, ideal for high quantity
Read More
The Incinerator Plant is output wastes incineration from Different petrochemical units. In this project we want to incinerate all output wastes from petrochemical units and also produced high pressure steam from incinerator plant heat generated. At first output waste from petrochemical collects and transfers to transit and sorting center in various forms. Input feeds of incinerator plant are shown in
Read More
MINIMUM CRITERIA FOR ENGINE OF INCINERATION CAPACITY OF INCINERATION 30KG/ H 1. BASIC SPECS: The burner for clinical waste need to be designated for the damages of all sort of waste created by the Facility for Health (waste type medical facility, center, medical lab for ruining ability of 30kg/ h). Pyrolytic gasification combustion control shall: ? Protect against advancement of
Read More
i- burners: use diesel , natural gas , liquefied petroleum gases according to standards burners should have main vent to be used for protection. 2- materials: -the chamber should be covered from inside with refractory brick with thickness 22 cm aluminum silicate insulation 11cm thickness with the ability to change this layer . – All surfaces made of carbon steel
Read More
Hazardous as well as likewise hazardous wastes, Medical pharmaceutical along with pleasant fluids Wastes Residential trash Electric as well as electronic wastes Hazardous waste Generally, all kind of wastes and also rubbishes Ability 50-60Kg/ h Combustion sustaining materials Coal oil, diesel oil Temperature degree inside 800-10000C 1000-12000C Burning performance ＞ 98% Power intake 1.3 KW Sound ＜ 78dB Index of
Read More
Biomedical Waste Any type of type of fluid or strong waste which may supply a danger of infection to individuals consisting of non-liquid tissue, body parts, blood or blood products as well as body fluids, research laboratory and also veterinary waste which includes human disease- setting off representatives, as well as disposed of sharps (i.e. syringes, needles, scalpel blades). Base
Read More
Ash should be only 5% of the waste material Weight of Incinerator – 50-60 Kg Municipal incinerators with a 10-metric ton/24-hour capacity, complete with Stacks, control panels and all accessories, complying with 01015 par. 5.16.1 LOT 2.0 Medical incinerator with a 10 kg/hour (15 lbs/hour) capacity shall be constructed on the site, complete with Stacks, control panels and
Read More
chemical agents to be utilized: 10% heptyl (unsymmetrical dimethylhydrazine) water solution, heptyl (unsymmetrical dimethylhydrazine) vapour with 0.8 to 1.0 kg/m3 concentration, 10% azotic (nitric) acid water solution, azotic (nitric) acid vapour with concentration up to 1.1 kg/m3; 2. neutralization method: thermal decomposition; 3. neutralization temperature: +800?C to +1200?C; 4. performance: ? vapour capacity: 70 to 200 m3/h, ? water solution
Read More